Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| AGJS | PITCH DIAMETER | 1.0460 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 12 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 63.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.1690 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.734 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 45.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.234 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.472 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.095 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.285 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| MATT | III MATERIAL | STEEL COMP 1022 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE 1022 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| 1A7-205-753 | 1A7-1A7-002L999 | 1A7-000-002L999 | 1A7-61-3 |
| 1A7-000-001L999 | 1A7-205-600 | 1A7-000-001L000 | 1A7-86-1 |
| 1A7-88 | 1A7-205-753 | 1A7-205-600 | 1A7-205-753 |
| 1A7-1042 | 1A7-61-3 | 1A7-205-600 | 1A7-1A7-001L999 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
