Note : We Will Not Share Your Information To Any Third Parties.
MRC | Criteria | Characteristic |
---|---|---|
AAHN | END SIMILARITY | NOT IDENTICAL |
AASA | THREAD LENGTH | 0.469 INCHES NOMINAL FIRST END, FIFTH PORTION |
ABHP | OVERALL LENGTH | 17.188 INCHES NOMINAL |
ABRR | KEYWAY WIDTH | 0.312 INCHES NOMINAL FIRST END, FIFTH PORTION |
AJYP | SCREW THREAD SERIES DESIGNATOR | SAE FIRST END, FIFTH PORTION |
AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND FIRST END, FIFTH PORTION |
BYFR | TEETH HARDNESS RATING | 56.3 ROCKWELL C MINIMUM AND 62.5 ROCKWELL C MAXIMUM |
CFFB | WORM THREAD QUANTITY | 1 |
CFFC | WORM THREAD LEAD | 0.9375 INCHES NOMINAL |
CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
CFFF | WORM PRESSURE ANGLE IN DEG | 27.500 |
CFFG | WORM HELIX ANGLE | 5 DEG 41 MIN |
CFFK | WORM OUTSIDE DIAMETER | 3.596 INCHES NOMINAL |
CFFL | WORM PITCH DIAMETER | 3.000 INCHES NOMINAL |
CFFM | SHAFT HARDNESS RATING | 20.3 ROCKWELL C MINIMUM AND 32.2 ROCKWELL C MAXIMUM |
CFFN | WORM THREAD SECTION LENGTH | 3.500 INCHES NOMINAL |
CFFP | WORM BODY LENGTH | 3.500 INCHES NOMINAL |
CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
CFFX | STRAIGHT UNTHREADED LENGTH | 0.344 INCHES NOMINAL FIRST END, FOURTH PORTION |
CFFX | STRAIGHT UNTHREADED LENGTH | 1.000 INCHES NOMINAL FIRST END, SECOND PORTION |
CFFX | STRAIGHT UNTHREADED LENGTH | 1.000 INCHES NOMINAL SECOND END, SECOND PORTION |
CFFX | STRAIGHT UNTHREADED LENGTH | 1.250 INCHES NOMINAL FIRST END, THIRD PORTION |
CFFX | STRAIGHT UNTHREADED LENGTH | 2.813 INCHES NOMINAL SECOND END, THIRD PORTION |
CFFX | STRAIGHT UNTHREADED LENGTH | 3.188 INCHES NOMINAL FIRST END, FIRST PORTION |
CFFX | STRAIGHT UNTHREADED LENGTH | 3.188 INCHES NOMINAL SECOND END, FIRST PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.250 INCHES NOMINAL FIRST END, FOURTH PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES NOMINAL FIRST END, THIRD PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES NOMINAL SECOND END, THIRD PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.575 INCHES NOMINAL FIRST END, SECOND PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.575 INCHES NOMINAL SECOND END, SECOND PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.000 INCHES NOMINAL FIRST END, FIRST PORTION |
CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.000 INCHES NOMINAL SECOND END, FIRST PORTION |
CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.2970 INCHES NOMINAL BOTH ENDS |
MATT | MATERIAL | STEEL,SAE 2315 |
ZZZV | III FSC APPLICATION DATA | WINCH,TACTICAL VEHICLE |
27WB1-2828 | 27W48H | 27W83MB | 27W2532 |
27W47MB | 27W024 | 27WB1-2828 | 27W47H |
27WIRE | 27W2532 | 27W75 | 27W2533 |
27W08G | 27W2533 | 27W48 | 27W75 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote