Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.320 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.320 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL 2ND END |
| AEPR | FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FIBER |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY WRAPPED STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY WRAPPED STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 5TH LAYER SPIRALLY WRAPPED STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 42.500 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE; TWO CLAMP-TYPE COUPLINGS |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
