Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-079-8634 Item Description: Resistor Variable N | 5905 | 000798634 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 20sf6096 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0630 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.500 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0550 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.000 NOMINAL INCHES |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.000 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 2.218 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0880 NOMINAL MILS AND 0.0980 NOMINAL CENTIMETERS |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | III CUBIC MEASURE | 3.141 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/+400.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1250.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK PRIMARY INPUT |
| FEAT | SPECIAL FEATURES | COUPLING ATTACHED TO SHAFT |
| TEST | TEST DATA DOCUMENT | 18876-13059259 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| 20S-6033-0122-4 | 20S-50 | 20S-1C7LF | 20S-15OHMSPORM5PCT |
| 20S 3050 | 20S-50 | 20S-6033-0131-0 | 20S-50 |
| 20S-6033-0122-1 | 20S-15OHMSPORM5PCT | 20S-6033-0122-V | 20S 3050 |
| 20S-6033 | 20S-5C7LF | 20S-6033-0131-1 | 20S-090 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
