Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 1.159 INCHES NOMINAL |
| ABNZ | EFFECTIVE LENGTH | 1.001 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.203 INCHES MINIMUM AND 0.228 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ABPK | INTERMEDIATE DIAMETER | 0.2444 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | CASEHARDENED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | 89.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL AND 91.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL |
| CQFX | PIN SMALL END DIAMETER | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| CSCG | PIN LARGE END DIAMETER | 0.294 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| CTHC | SECOND END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| R20-01-06A75G0000-0 | R20-02-H00 | R20-02-H00 | R20-04-000 |
| R20-03L0 | R20-03-000 | R20 02 000 | R20-02GP |
| R20-04-000 | R20-04-G00 | R20-03-000 | R20-06G |
| R20-04-000 | R20-02-000 | R20-02-000 | R20 04 G00 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
