Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3 BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AASA | THREAD LENGTH | 1.500 INCHES NOMINAL BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.297 INCHES NOMINAL FIRST END |
| ABHP | OVERALL LENGTH | 19.569 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 FIRST END |
| ABSC | SPLINE MINOR DIAMETER | 0.235 INCHES NOMINAL FIRST END |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.438 INCHES NOMINAL FIRST END |
| AEDN | TIP LENGTH | 0.469 INCHES NOMINAL SECOND END |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.406 INCHES NOMINAL BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| AGPX | SHOULDER OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| AKMH | CORE DIAMETER | 0.187 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| APTD | END TYPE | ROUND, INTERNAL SPLINED FIRST END |
| APTD | END TYPE | THREADED MALE SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| AXFH | SPLINE LENGTH | 0.250 INCHES NOMINAL FIRST END |
| AXFK | TONGUE LENGTH | 0.469 INCHES NOMINAL SECOND END |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | III CASING MATERIAL | STEEL |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.187 INCHES NOMINAL DIAMETER FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.250 INCHES NOMINAL DIAMETER SECOND END |
| CFRM | TORSIONAL DEFLECTION RATING | 2.0 DEG FT-LB IN. TORSIONAL DEFLECTION RATING FOR WINDING,4.0 DEG FT-LB IN. TORSIONAL RATING FOR UNWINDING |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED |
| CFRP | CASING LENGTH BETWEEN FERRULES | 18.500 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.273 INCHES NOMINAL |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRW | END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 19.469 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSF | CORE TIP THREAD CLASS | 2 SECOND END |
| CFSH | CORE TIP THREAD DIRECTION | RIGHT-HAND SECOND END |
| CFSJ | CORE TIP THREAD LENGTH | 0.750 INCHES NOMINAL SECOND END |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | 3.500 INCHES |
| FEAT | SPECIAL FEATURES | 60 IN.-LBS TORSION STRENGTH IN UNWINDING DIRECTION |
| LA2-D22A65 | LA2-7 | LA2-D22A65 | LA20-1 |
| LA2-DN140FA65 | LA20-05B | LA20 | LA2-D22 |
| LA2-D22A65 | LA20-05BM2167 | LA2-DT2 | LA20-1 |
| LA2-DT2 | LA2-DT2 | LA2-D22 | LA20-05BM |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
