Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| APJC | THREAD LOCATION | INTERNAL |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 2500.000 |
| AGAV | III END ITEM IDENTIFICATION | NAVY WEAPONS CODE JA, USNS STALWART CLASS TAGOS |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| ASMM | CONNECTION QUANTITY | 1 AND 1 AND 1 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | NPT |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.250-18 |
| AZFG | MOUNTING BOLT HOLE SPACING | 4.508 IN. BY 4.508 IN. |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASAP | SPLINE PITCH | 12/24 |
| AAUJ | SPLINE MAJOR DIAMETER | 1.248 INCHES NOMINAL |
| AXFC | CONNECTION DESIGN | FLANGED AND FLANGED AND THREADED |
| ABSA | SPLINE QUANTITY | 14 |
| AXFD | BOLT HOLE THREAD SIZE | 0.375-16 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | 1.310 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 4 |
| AAUH | SPLINE MINOR DIAMETER | 1.063 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FLANGE |
| ARQA | SHAFT PROTRUSION LENGTH | 1.940 INCHES NOMINAL |
| 236-0042 | 236-00486 | 236-0040-01 | 236-0052-03 |
| 236-002 | 236-0-001 REV A ITEM NO.3 | 236-0044-01 | 236-004 |
| 236-005 | 236-0-001 | 236-002 | 236-00024 |
| 236-005 | 236-0048-01 | 236-005 | 236-004 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
