Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| ARQA | SHAFT PROTRUSION LENGTH | 1.690 INCHES NOMINAL |
| ASMM | CONNECTION QUANTITY | 2 AND 1 |
| ABUJ | THREAD SIZE | 0.250-16 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AZFF | BOLT HOLE SPACING | 1.190 IN. BY 2.310 IN. |
| AJLF | HOUSING MATERIAL | STEEL |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGJS | PITCH DIAMETER | 1.137 INCHES MINIMUM AND 1.146 INCHES MAXIMUM |
| AAPL | TORQUE LOAD RATING | 3218.0 INCH-POUNDS |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | SAE-J518B |
| AZFG | MOUNTING BOLT HOLE SPACING | 4.508 IN. BY 4.508 IN. |
| ASAP | SPLINE PITCH | 12/24 |
| APJC | THREAD LOCATION | INTERNAL |
| AAUH | SPLINE MINOR DIAMETER | 1.0497 INCHES MINIMUM AND 1.0627 INCHES MAXIMUM |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AAUJ | SPLINE MAJOR DIAMETER | 1.2243 INCHES MINIMUM AND 1.2293 INCHES MAXIMUM |
| AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
| ABSA | SPLINE QUANTITY | 14 |
| AXFD | BOLT HOLE THREAD SIZE | 0.438-14 |
| AXFH | SPLINE LENGTH | 1.000 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 8.080 CUBIC INCHES |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 4000.0 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AAXX | MOUNTING TYPE | PAD |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
