Note : We Will Not Share Your Information To Any Third Parties.
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.5604 INCHES MINIMUM AND 0.5624 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 0.8748 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
ADZG | LUBRICATION MATERIAL | GREASE |
AGAV | END ITEM IDENTIFICATION | 5895-01-119-1601 RECORDER-REPROCER,SIGNAL DATA |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | STAMPED |
AGYK | SHIELD QUANTITY | 2 |
AGZC | LOAD DIRECTION | RADIAL |
AKVV | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
CTHQ | BEARING PRELOAD RATING | 5.0 POUNDS NOMINAL |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827,A72832 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL COMP 440C OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-23063,CALSS 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
RDAL | REFERENCE DATA AND LITERATURE | MIL-B-23063 CLASS 3 EXCEPT QUALIFICATION |
STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
TMDN | TYPE/MODEL DESIGNATION | RD-450/ASH-33 |
ZZZK | SPECIFICATION/STANDARD DATA | 28009-16610107 MANUFACTURERS SPECIFICATION CONTROL |
SSR-0225-S17 | SSR-0125-S17 | SSR-0237-S17 | SSR-0237-S17 |
SSR 0112 S17 | SSR-0112-S17 | SSR-0137 | SSR-0225-S17 |
SSR-0125-S17 | SSR-0100 | SSR-0187-S17 | SSR-0125 |
SSR 0150 S17 | SSR 0225 S17 | SSR-0075-S17 | SSR-0187-S17 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote