Note : We Will Not Share Your Information To Any Third Parties.
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
AAQL | BODY STYLE | STANDARD ROUND C |
AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 1.8260 INCHES NOMINAL |
ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
ABKU | FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
AJSL | BODY SIZE | 10 |
AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
AJSP | STATOR INPUT CURRENT RATING | 80.0 MILLIAMPERES NOMINAL |
AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 190.0 MILLIWATTS NOMINAL |
AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
AJSW | ZRO RESISTANCE IN OHMS | 34.00 NOMINAL |
AJSY | ZSO RESISTANCE IN OHMS | 29.00 NOMINAL |
AJTA | ZRS RESISTANCE IN OHMS | 40.00 NOMINAL |
AJTS | ROTOR DC RESISTANCE IN OHMS | 32.00 NOMINAL |
AJTT | STATOR DC RESISTANCE IN OHMS | 25.00 NOMINAL |
AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5/+7.5 |
AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS MAXIMUM |
AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
AJVW | ALIGNMENT HOLE QUANTITY | 3 |
AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES MAXIMUM |
CQTM | TERMINAL LOCATION | REAR |
CQXQ | PLUS J ZRO REACTANCE IN OHMS | 119.00 NOMINAL |
CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
CRGZ | PLUS J ZSO REACTANCE IN OHMS | 124.00 NOMINAL |
CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
CRKL | PLUS J ZRS REACTANCE IN OHMS | 12.70 NOMINAL |
CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote