Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | 12.20 NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| AJSL | BODY SIZE | 15 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 24.60 NOMINAL |
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| ABHP | OVERALL LENGTH | 1.9750 INCHES NOMINAL |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| CWXK | III SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | III SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 170.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 580.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 20.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 4.30 NOMINAL |
| AJTC | ZSS RESISTANCE IN OHMS | 25.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 4280.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJWE | III SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWG | III SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | III SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| AJXB | III SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 150.00 NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.3820 INCHES MINIMUM AND 1.3920 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| EGH-8-EE-7 | EGH-8-BS-9 | EGH-11-E-3 | EGH-8-A-7 |
| EGH-11-E-4 A521 | EGH-8-LBQ-1 L898 | EGH-10-CKS-5 | EGH 15 D 1 |
| EGH-11-C-4 A002 | EGH-11-E-6 | EGH-15-DS-1 | EGH-8-A-7 |
| EGH-8-BS-9 | EGH-8-A-7 | EGH-8-BS-9 | EGH-8-F-1 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
