Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| ADZC | ENVIRONMENTAL PROTECTION | HERMETIC |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| APNP | DUTY TYPE | CONTINUOUS |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| ABTD | MOUNTING SLOT WIDTH | 0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AKDX | WINDING QUANTITY | 1 |
| FEAT | SPECIAL FEATURES | TEMP RANGE MINUS 70.0 DEG TO PLUS 125.0 DEG C; PICKUP VOLTAGE 18.0 VDC MAX; HOLD VOLTAGE 7.0 VDC; DROP-OUT VOLTAGE 1.5 VDC MIN; COIL CURRENT 0.11 AMP MAX; TERMINAL STRENGTH 5.0 LBS NOMINAL; PINS ARE UNDERPLATED (EXCEPT POLARIZING PIN IS TINNED) PRIOR TO GOLD PLATING (PER MIL-G-45204, TYPE II, CLASS I) WITH NICKEL 50.000 TO 150.000 MICROINCHES THICK; PINS ARE 0.062 INCH NOMINAL DIA AND 0.270 INCH NOMINAL LENGTH WITH EXCEPTION OF POLARIZING PIN WHICH IS 0.300 INCH NOMINAL LENGTH; 0.050 INCH NOMINAL THICKNESS SILICONE RUBBER GASKET PER AMS 3332, WITH SHORE HARDNESS OF 20, IS LOCATED AGAINST BOTTOM OF CASE AND AT BASE OF PINS |
| CBBL | FEATURES PROVIDED | POLARIZED |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 15.0 AMPERES AC AND 15.0 AMPERES DC RESISTIVE LOAD 8.0 AMPERES AC AND 8.0 AMPERES DC INDUCTIVE LOAD 2.0 AMPERES AC AND 2.0 AMPERES DC LAMP LOAD 6.0 AMPERES AC AND 4.0 AMPERES DC MOTOR LOAD |
| APNA | WINDING DC RESISTANCE RATING | 320.0 OHMS NOMINAL SINGLE WINDING |
| ABKW | OVERALL HEIGHT | 1.310 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.718 INCHES MAXIMUM |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 200.0 AC AND 28.0 DC |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| ABMK | OVERALL WIDTH | 0.525 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 PIN ALL FUNCTIONS |
| CQYJ | MOUNTING FACILITY PATTERN | IN-LINE SINGLE MOUNTING FACILITY |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.396 INCHES MINIMUM AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| APCN | COIL QUANTITY | 1 |
| J-D2A-116 | J D2A 059 | J-D2A-102 | J-D1N-105 |
| J-D2A-077 | J-D1C | J-D2A-051 | J-D2C-063 |
| J-D2A-051 | J D1A 011 | J-D2A-300M | J-D2A-077 |
| J-D2A-059 | J-D2A-044 | J-D2A-044 | J D2A 003 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
