Note : We Will Not Share Your Information To Any Third Parties.
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | WEBBED, WITH LIGHTENING HOLES |
ABSA | SPLINE QUANTITY | 14 BOTH ENDS |
AGJS | PITCH DIAMETER | 5.4167 INCHES NOMINAL |
AJLA | TEETH QUANTITY | 65 |
ANTP | BORE STYLE | W/COUNTERBORE BOTH ENDS |
BDTX | SPLINE PITCH DIAMETER | 0.7000 INCHES NOMINAL BOTH ENDS |
CQFM | III HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL |
CWCD | NOMINAL OUTSIDE DIAMETER | 5.557 INCHES |
CWFR | NOMINAL OVERALL LENGTH | 2.120 INCHES |
CWNH | TOOTH FORM | STANDARD |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.810 INCHES BOTH ENDS |
CWRM | FACE NOMINAL WIDTH | 0.500 INCHES |
CWRS | BORE NOMINAL DIAMETER | 0.800 INCHES BOTH ENDS |
CWTB | COUNTERBORE NOMINAL DEPTH | 0.560 INCHES BOTH ENDS |
CWTG | COUNTERBORE NOMINAL DIAMETER | 0.817 INCHES BOTH ENDS |
CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
CWTX | HUB NOMINAL DIAMETER | 0.998 INCHES FIRST END |
MATT | III MATERIAL | STEEL OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
528-001-1 | 528-00204 | 528-002 | 528-000A2.5-5 |
528 0023 005 | 528-00 | 528-000A2.5-5 | 528-001-7 |
528-00 | 528-0021-005 | 528-001 | 528-002-00 |
528 001 1 | 528 000 F 6 0 25 | 528-0009-005 | 528-000A2.5-5 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote