Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | 2 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE 2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE" |
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 0.75 |
| ADQR | Center To Center Distance | 33.750 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +55.0 TO 1400.0 |
| BTTD | Rated Swing | 10.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 10.125 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 5.750 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | STEP CONE PULLEY, BACK GEARED" |
| AKYD | Accessory Components And Quantity | 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE" |
| BTWM | Headstock Center Taper Size Designator | 2 ASA STANDARD |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| FREQ | Frequency In Hertz | 60.0 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0 TO 80.0 PER INCH |
| 00L90 | 00L131 | 00L90 | 00L360 |
| 00L360 | 00L90 | 00L127 | 00L90SIZE1 |
| 00L360 | 00L360 | 00LA24 | 00L-03414-000 |
| 00L90 | 00L925 | 00L793 | 00L90SIZE1 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
