Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5999-01-115-7556 Item Description: Delay Line | 5999 | 011157556 | 0 | P | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Mil-D-23859 | 5 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | RECTANGULAR |
| ABGD | SLOT LENGTH | 0.020 INCHES NOMINAL |
| ACZT | ADJUSTMENT DEVICE QUANTITY | 1 |
| ACZU | ADJUSTMENT DEVICE DRIVE TYPE | SLOTTED SCREW |
| ADAQ | BODY LENGTH | 1.374 INCHES MINIMUM AND 1.434 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 0.300 INCHES NOMINAL |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 1.000 NOMINAL INCHES |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AMSE | VOLTAGE RATING | 50.000 POUNDS PER HOUR WET |
| ANSL | INPUT IMPEDANCE RATING | 100.000 OHMS |
| ARBR | BODY DEPTH | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AZGM | MOUNTING FACILITY | TERMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | FOUR POSITION RECTANGULAR |
| BHTH | ATTENUATION IN DECIBELS | 1.500 |
| BZWM | SIGNAL DELAY METHOD | LUMPED CONSTANT |
| CCDN | DELAY TIME VARIATION METHOD | VARIABLE |
| CCDQ | SECTION DELAY TIME | 0.000 NANOSECONDS MINIMUM SINGLE SECTION AND 160.000 NANOSECONDS MAXIMUM SINGLE SECTION |
| CCDR | SEGMENT QUANTITY PER SECTION | 1 SINGLE SECTION |
| CCDT | DELAY TIME VARIATION PER DEG CELSIUS | 0.010 NANOSECONDS |
| CCDX | PULSE RISE TIME RATING | 32.0 NANOSECONDS |
| CCFF | TERMINAL TYPE AND QUANTITY | 4 PIN |
| CDQK | SLOTTED HOLE WIDTH | 0.010 INCHES NOMINAL |
| SPCL | SPECIAL TEST FEATURES | SELECTED AND TESTED FOR AN/TPX-42A(V)10 |
| TEST | TEST DATA DOCUMENT | 00752-505174 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
