Note : We Will Not Share Your Information To Any Third Parties.
MRC | Criteria | Characteristic |
---|---|---|
APJC | THREAD LOCATION | INTERNAL AND INTERNAL AND INTERNAL |
ABSA | SPLINE QUANTITY | 16 |
SR-1 | SPEC/STD CONTROLLING DATA | |
ABTB | MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
ASMM | CONNECTION QUANTITY | 1 AND 1 AND 1 |
AXFH | SPLINE LENGTH | 0.910 INCHES NOMINAL |
AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 0.950 CUBIC INCHES |
AZFG | MOUNTING BOLT HOLE SPACING | 4 .344 IN. DIA MTG HOLES ON 3.536 BY 3.536 IN MTG CENTERS |
AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
SR-1 | MFR SOURCE CONTROLLING REFERENCE | 5266613 |
AAPL | TORQUE LOAD RATING | 454.0 INCH-POUNDS |
AZFE | CONNECTION GOVERNMENT SPEC/STD | INLET/OUTLET PER MS33649-10,DRAIN PER MS33649-6 |
AJAB | DRIVE SHAFT TYPE | SPLINED, STRAIGHT INTERNAL |
AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 2 DEG C TO PLUS 32 DEG C |
SR-1 | MANUFACTURERS CODE | 53711 |
AXFC | CONNECTION DESIGN | THREADED AND THREADED AND THREADED |
AXFP | DISPLACEMENT TYPE | CONSTANT |
ABTJ | MOUNTING HOLE QUANTITY | 4 |
AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.0 |
AAXX | MOUNTING TYPE | FACE |
526-0 | 526-0 | 526-0 | 526-0006 |
526-0006 | 526-0007 | 526-0002-010 | 526-0003 |
526-000-200 | 526 001 | 526-0002-000 | 526-0001 |
526-001 | 526-001 | 526-00-322 | 526-0009 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote