Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-1 | SPEC/STD CONTROLLING DATA | |
| CFRW | END OVERALL DIAMETER | 1.188 INCHES NOMINAL FIRST END 0.875 INCHES NOMINAL SECOND END |
| BJPS | CASING MATERIAL | ANY ACCEPTABLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F110 |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| ZZZV | III FSC APPLICATION DATA | SPEEDOMETER,TRUCK |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| AKMF | CORE SURFACE TREATMENT | ZINC COATED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| AEDN | TIP LENGTH | 1.018 INCHES MINIMUM AND 1.022 INCHES MAXIMUM FIRST END 0.950 INCHES MINIMUM AND 1.010 INCHES MAXIMUM SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| ABHP | OVERALL LENGTH | 86.078 INCHES MINIMUM AND 86.391 INCHES MAXIMUM |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 POUNDS TORSION STRENGTH EITHER DIRECTION |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CFRP | CASING LENGTH BETWEEN FERRULES | 84.937 INCHES MINIMUM AND 85.063 INCHES MAXIMUM |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRZ | CORE OVERALL LENGTH | 86.047 INCHES MINIMUM AND 86.359 INCHES MAXIMUM |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
