Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY DRILLING CAPABILITY,SPINDLE SPEED RANGE IN RPM,HEAD TYPE,SWIVE ADJUSTMENTIN DEG |
| BTSZ | SPINDLE SPEED QUANTITY | 4 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 470.0 TO 1950.0 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 CLASS AND 14 SIZE |
| AJGD | HEAD TYPE | RADIAL SWINGING/SLIDING |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRL | SPINDLE TRAVEL DISTANCE | 4.000 INCHES NOMINAL |
| BNRW | BASE WORKING SURFACE LENGTH | 7.000 INCHES NOMINAL |
| BNRX | BASE WORKING SURFACE WIDTH | 10.000 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 110.000 |
| BNRZ | COLUMN TYPE | ROUND |
| BNSC | DRILL CHUCK SIZE ACCOMMODATED | 1/2 IN. KEY |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 7.000 INCHES NOMINAL |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSP | UPPER WORKING SURFACE SHAPE | SQUARE |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | ANY ACCEPTABLE |
| ACDC | CURRENT TYPE | AC |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.000 |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 90.0 LEFT 90.0 RIGHT |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CORD,15 FT LG,1 CORD GRIP PLUG,POLARIZED 3 POLE |
| FAAZ | PHASE | SINGLE |
| BCRH | SPINDLE QUANTITY | 1 |
| AQDD | FEED TYPE | HAND |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | ANY ACCEPTABLE |
| BNRY | DRILLING CAPABILITY | 1/2 IN. DRILLING CAPACITY IN CAST IRON,3/8 IN.DRILLING CAPACITY IN STEEL |
| BNSH | BASE WORKING SURFACE AREA | ANY ACCEPTABLE |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | LOCATED ON BASE |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | ANY ACCEPTABLE |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED |
| BNSS | UPPER WORKING SURFACE LENGTH | 10.000 INCHES MINIMUM |
| BNST | UPPER WORKING SURFACE WIDTH | 10.000 INCHES MINIMUM |
| BPSX | HEAD VERTICAL ADJUSTMENT | ANY ACCEPTABLE |
| SR-1 | MANUFACTURERS CODE | 81348 |
| AAXX | MOUNTING TYPE | BENCH |
| BQLR | SPINDLE TYPE | SOLID MALE TAPERED FOR DRILL CHUCK |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 00D676A |
| FREQ | FREQUENCY IN HERTZ | 60.000 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
