Note : We Will Not Share Your Information To Any Third Parties.
MRC | Criteria | Characteristic |
---|---|---|
ARQA | SHAFT PROTRUSION LENGTH | 0.665 INCHES NOMINAL |
ABSA | SPLINE QUANTITY | 11 |
ABTB | MOUNTING HOLE DIAMETER | 0.250 INCHES NOMINAL |
AWLS | CONNECTION TYPE | INLET AND OUTLET |
ABTJ | MOUNTING HOLE QUANTITY | 4 |
AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
ASMM | CONNECTION QUANTITY | 1 AND 1 |
AZFG | MOUNTING BOLT HOLE SPACING | 3.250 IN. BY 2.687 IN. |
AJLF | HOUSING MATERIAL | STEEL |
AGJS | PITCH DIAMETER | 0.458 INCHES NOMINAL |
AZFF | BOLT HOLE SPACING | 1.500 IN. BY 0.688 IN. |
AECS | BOLT HOLE QUANTITY | 4 AND 4 |
ASAP | SPLINE PITCH | 24/48 |
AAUH | SPLINE MINOR DIAMETER | 0.375 INCHES NOMINAL |
AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
AAPL | TORQUE LOAD RATING | 114.0 INCH-POUNDS |
AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
AXFD | BOLT HOLE THREAD SIZE | 0.312-18 AND 0.312-18 |
AXFH | SPLINE LENGTH | 0.580 INCHES NOMINAL |
AXFP | DISPLACEMENT TYPE | CONSTANT |
AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 0.310 CUBIC INCHES |
AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 2400.0 |
AAUJ | SPLINE MAJOR DIAMETER | 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
AAXX | MOUNTING TYPE | FLANGE |
317-00031 | 317-001-009 | 317-00-0003 | 317-001-014 |
317-00-0002 | 317-00-0006 | 317-00-0003 | 317-00-0004 |
317-00-0002 | 317-001-010 | 317-001-011 | 317-00-0007 |
317-001-011 | 317-00-0006 | 317-00-0004 | 317-00-0007 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote