Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | AXIAL CLAMP SEALS CT3 DESIGN |
| CPCW | HOUSING BORE DIAMETER | 0.937 INCHES NOMINAL |
| ADUC | SEAL WIDTH | 1.125 INCHES NOMINAL |
| CR5.30.06 | CR5 21 | CR5.30.03 | CR5 16 |
| CR5-3 | CR5 17 | CR5 20 | CR5.30.03 |
| CR5 24 | CR5 1 | CR5.30.07 | CR5 18 |
| CR5-2S | CR5 166 | CR5-15 | CR5-19 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
