Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED, OFFSET, SOLID |
| AGJS | PITCH DIAMETER | 1.5990 INCHES MINIMUM AND 1.6010 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 32 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.700 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.386 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.032 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.353 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.471 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.127 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.312 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TWO PARALLEL GROOVES 0.0200 IN. DIA,LOCATED ON TEETH 0.165 IN. MIN,0.175 IN. MAX |
| MATT | III MATERIAL | STEEL COMP 1118 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE 1118 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB, RECESSED BODY |
| GE50-103Z | GE500B-3-4 | GE500B-2-4 | GE500B3-4C |
| GE500B-2-4 | GE50-103Z | GE500C | GE500B6-6C |
| GE50-103Z | GE500B3-8 | GE500B3-4C | GE500C |
| GE500B4-8 | GE50033-4 | GE500B3-8 | GE500B3-5C |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
